Panasonic Pick And Place Machine NPM-D3 Features
1. High area productivity with total mounting lines
Higher productivity and quality with placement and inspection process integration.
2. Configurable modules allow flexible line setup
Head location flexibility with plug-and-play functions.
3.Comprehensive control of lines, floor and factory with system software
Production plan support through line operation monitoring.
Panasonic Chip Mounter NPM-D3 Specifications
|
Model ID |
NPM-D3 |
Rear head
Front head |
Lightweight
16-nozzle head |
12-nozzle head |
8-nozzle head |
2-nozzle head |
Dispensing head |
No head |
|
Lightweight 16-nozzle head |
NM-EJM6D |
NM-EJM6D-MD |
NM-EJM6D |
|
12-nozzle head |
|
8-nozzle head |
|
2-nozzle head |
|
Dispensing head |
NM-EJM6D-MD |
-- |
NM-EJM6D-D |
|
Inspection head |
NM-EJM6D-MA |
NM-EJM6D-A |
|
No head |
NM-EJM6D |
NM-EJM6D-D |
-- |
|
PCB dimensions*1
(mm)
|
Dual-lane mode |
L 50 x W50 ~ L 510 x W 300 |
|
Single-lane mode |
L 50 x W50 ~ L 510 x W 590 |
PCB
exchange
time |
Dual-lane mode |
0 s* *No 0s when cycle time is 3.6 s or less |
|
Single-lane mode |
3.6 s* *When selecting short conveyors |
|
Electric source |
3-phase AC 200, 220, 380, 400, 420, 480 V 2.7 kVA |
|
Pneumatic source *2 |
0.5 MPa, 100 L /min (A.N.R.) |
|
Dimensions *2 (mm) |
W 832 x D 2 652 *3 x H 1 444 *4 |
|
Mass |
1 680 kg (Only for main body:This differs depending on the option configuration.) |
